Sealed Circle Track Crate Engine 350/350   SKU: 88958602 RACERS PRICE: $3,058.00 Order Now
Circle Track Crate Engine 350/350 88958602 Description
Great racing power at a reasonable cost (350 HP at 5000 RPM _ torque 390 @ 4000 RPM) This is a factory sealed crate engine package, complete from high rise dual plane intake manifold, stamped steel valve covers with racing style breathers, and 8 quart single kick-out circle track racing oil pan. The 350 engine is a great value with the nodular cast iron crankshaft, iron vortec heads with 1.94"/1.50" valves, flat tappet hydraulic lifters, and HEI distributor. The base engine is a 330 HP 350ci, with the following parts: P/N 10105123 4 bolt iron block P/N 14088527 Nodular cast iron crankshaft P/N 10108688 PM rod P/N 12361371 Cast aluminum piston P/N 24502476 Camshaft with hydraulic flat tappet lifters P/N 12558060 Iron vortec head P/N 12366573 High rise dual plane intake manifold P/N 1104067 HEI distributor P/N 25534353 8 quart circle track oil pan (with oil filter) P/N 25534359 Valve cover kit with breather tube P/N 25534355 Valve cover breather kit P/N 25534352 Special rocker arm nut "kool nut design" Technical Notes: These engines are sealed at the intake manifold, cylinder head, front cover, and oil pan with special twist off bolt heads. The 350 HP @ 5000 RPM was derived from a superflow dyno using a 4 barrel 650 cfm Holley carburetor P/N 80541-1, 32" long by 1 5/8" to a 1 3/4" stepped header with a 3" collector, and 92 octane unleaded gasoline. This engine package DOES NOT include a water pump, or FLYWHEEL. Oil pan clears most GM rear steer chassis with stock engine location. Oil pan is 8" deep at sump. There are no dip stick provisions but a site plug is on side of pan sump.